Metz 42TN92 - Manual (Page 12)

- 42 -
Volume Setting
Press the “V+” button to increase volume.
Press the “-V” button to decrease volume. A
volume level scale (slider) will be displayed
at the bottom of the screen.
Programme Selecting
(Previous or next programme)
• Press the “- P” button to select the previous
programme.
• Press the “P +” button to select the next
programme.
Programme Selecting (direct access):
Press digit buttons on the remote control
handset to select programmes between 0
and 9. The TV will switch to the selected
programme after a short delay.
• For a two digit programme number enter the
second digit after pressing the first digit
within 2 seconds.
Menu System
Your TV has been designed with a menu
system to provide easy manipulation of a
multifunction system.
Press the “M” button to enter the menu.
Press _ / ` button to select a menu title and
then a / b button to select a menu item and
_ / ` or “OK” button to enter the menu item.
You can access the menus directly by
pressing the coloured buttons on the remote
control:
Red Button Sound Menu
Green Button Picture Menu
Yellow Button Feature Menu
Blue Button Install Menu
• Press button to exit the menu.
• Press the “M” button to return to the previous
menu.
Picture menu
By pressing _ / ` button, select the first icon.
Picture menu appears on the screen.
OK
Mode Cinema
Contrast
PAL 50Hz
Brightness
Sharpness
Colour
Colour Temp Warm
Noise Reduction
Reset
10
24
62
32
Film Mode Off
3D Comb Off
Off
PICTURE
Mode
By pressing a / b button, select Mode.
Press _ / ` button to choose one of these
options: Natural, Cinema and Dynamic.
Picture mode can be changed directly by
pressing the PP button.
Contrast
By pressing a / b button, select Contrast.
Press ` button to increase contrast. Press _
button to decrease contrast. Contrast level
can be adjusted between 0 and 63.
Brightness
By pressing
a
/ b button, select Bright-
ness. Press ` button to increase brightness.
Press _ button to decrease brightness.
Brightness level can be adjusted between 0
and 63.
Sharpness
By pressing a / b button, select Sharp-
ness. Press ` button to increase sharp-
ness. Press _ button to decrease sharp-
ness. Sharpness level can be adjusted be-
tween 0 and 31.