MACKIE D-2 User Manual

Page 2

Advertising
background image

S P E C I F I C A T I O N S *

Frequency Response:

Mic Input to any Output (Trim at 0 dB) ..................+0, –1 dB, 20 Hz to 20 kHz
Line/CD Input to any Output .....................................+/- 0.5 dB, 20 Hz to 20 kHz
Phono Input to any Output ........................................+/- 1 dB of RIAA EQ curve

Distortion (THD and IMD):

THD @ Main Output, 20 Hz to 20 kHz
Mic Input @ 30 dB Gain ................................................Less than 0.0075%
Line/CD Input @ 0 dB Gain ..........................................Less than 0.0075%
Phono Input .....................................................................Less than 0.01 %

THD @ Phones Output, 20 Hz to 20 kHz
Line Input @ 0 dB Gain .................................................Less than 0.03%

SMPTE IMD @ +4dBu Output
Mic Input @ 30 dB Gain ................................................Less than 0.008%
Line/CD Input @ 0 dB Gain ..........................................Less than 0.008%

Common Mode Rejection Ratio (CMRR):

Mic Input (Gain = maximum) .....................................Greater than 60 dB @ 1 kHz

Crosstalk:

Adjacent Inputs or Input to Main Output ..............Less than -85 dB @ 1 kHz

Noise Characteristics:

Equivalent Input Noise (E.I.N.), 20 Hz to 20 kHz
Mic Input (150 Ω source impedance) .....................Less than -123 dBu
Phono Input (500 Ω/500 mH source imp.) ............Less than 0.3 µV
CD/Line Input (150 Ω source impedance) ............Less than -110 dBu
Dynamic Range (Main Out) ........................................Greater than 100 dB

Maximum Input Levels:

Rated at 1% THD
Mic Input (Gain @ minimum) .....................................+9 dBu
CD and Line Inputs (PGM Gain = 0 db) ...................+22 dBu
FX Input ..............................................................................+22 dBu
Phono Input .....................................................................78mV @ 1kHz

Input/Output Characteristics:

Input Gain Control Range
Mic Input ...........................................................................+3 dB to +50 dB
PGM Input .........................................................................OFF to +13 dB
FX Return ...........................................................................OFF to +13 dB

Input Impedance:

Mic Input: ..........................................................................2.4 kΩ, balanced
CD/ Line Input .................................................................20 kΩ, balanced
FX Return ...........................................................................20 kΩ, balanced
Phono Input .....................................................................47.5 kΩ shunted with 200 pF

Maximum Output Levels:

XLR Main Output ............................................................+22 dBu
RCA Main Output ...........................................................+22 dBu
Booth Output ...................................................................+22 dBu
FX Send ..............................................................................+22 dBu
Phones ................................................................................15 volts rms into 8 Ω (28 watts)

Output Impedance:

Main XLR/RCA Output ..................................................150 Ω
Booth Output ...................................................................150 Ω
FX Send ..............................................................................150 Ω
Phones ................................................................................25 Ω

Equalization:

Mic Channel
Low ......................................................................................±15 dB @ 80 Hz
Mid .......................................................................................±15 dB @ 2.5 kHz
High .....................................................................................±15 dB @ 12 kHz

PGM Channel
Low ......................................................................................+10/–inf dB @ 300 Hz
Mid .......................................................................................+10/–inf dB @ 1 kHz
High .....................................................................................+10/–inf dB @ 4 kHz

VU Meters:

12-segment pre-fader PGM meters
12-segment pre-fader Main Mix meters
OL (+20), +10, +7, +4, +2, 0, –2, –4, -7, –10, –20, -30
0 LED = +4 dBu
Mic Input Signal Present LED (Sensitivity) .............-20 dBu

AC Power Requirements:

Power Consumption .....................................................20 watts
Universal AC Power Supply .........................................100 VAC – 240 VAC, 50-60 Hz

Physical Dimensions and Weight:

Height .................................................................................15.49” / 393.4mm (including
knobs and connectors)
Width ..................................................................................10” / 254mm
Depth ..................................................................................4.62” / 117.3mm (including
knobs and connectors)
Weight ................................................................................11lb / 5kg (with FireWire card)

The d.2 mounting slots are compatible with the Odyssey Battle Bridge. This
consists of two L brackets which bolt to the d.2 and allow you to fit it securely
between two turntable cases. See www.odysseygear.com for more details.

Options:

d.2 FireWire I/O Card

© 2005 LOUD TECHNOLOGIES INC. ALL RIGHTS RESERVED. “MACKIE.” AND THE “RUNNING MAN” FIGURE ARE
REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. ALL OTHER TRADEMARKS ARE PROPERTY OF THEIR
RESPECTIVE OWNERS.

*

ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Advertising