Motorola 9505 - Manual (Page 177)

Customizing Phone Features 173
r
Set System Scan Preference
Satellite Mode
Cellular Mode
(GSM 900/1800)
(GSM 900)
(TDMA 800/1900)
(CDMA 1900)
This feature is not available in satellite mode, GSM
cellular mode, TDMA cellular mode, or CDMA 1900
cellular mode.
Cellular Mode
(CDMA/AMPS)
The system scan feature lets you select the type of
cellular system your phone accesses. This feature
typically is configured by your cellular service
provider.
Select a System Scan Method
The display shows Analog when you are registered
with an analog system, or Digital when you are
registered with a digital system.
1. Follow the steps in “Getting to Phone
Setup...” to get to System Scan , and then
press
O
to select.
2. Press
M
to scroll to Std A/B , Scan A/B, Std B/
A , Scan B/A , Scan A , Scan B , Home Only , or
Preferred SIDs , and then press
O
to select.
See the table on page 174 for a description
of these system scan settings.
3. Press and hold
C
to exit the menu.