Motorola SB5100 Series - Manual (Page 19)

13 SB5100 Series Cable Modem User Guide
Setting Up a USB Driver in Windows 98, continued
Introduction Before You Begin Installation & Configuration FAQ Troubleshooting Glossary License
X
Home Print Exit
4 Be sure “CD-ROM drive” is the only box checked.
5 Click Next.
The message “Please wait while Windows searches for a new driver for this device”
is displayed.
6 If your computer successfully locates the driver, skip to step 8.
If your computer does not locate the driver, the previous window is displayed again.
Select Specify a location and type the location of your CD-ROM drive.
To load the driver successfully, you may need to click Browse to manually select the
driver file from the CD-ROM. For the SB5100 or SB5101, select the NetMotCM.sys
file.
Or
For the SB5120, select the SB5120.inf file.
7 Click Next.