Maxtor DiamondMax Plus 5120 - Manual (Page 25)

INSTALLATION
4 – 3
Figure 4 - 2
Single Pack Shipping Container (Option A)
Figure 4 - 3
Single Pack Shipping Container (Option B)
Repacking
If a Maxtor drive requires return, repack it using Maxtor packing materials, including the antistatic bag.
Physical Installation
Recommended Mounting Configuration
The DiamondMax™ drive design allows greater shock tolerance than that afforded by larger, heavier drives.
The drive may be mounted in any attitude using four size 6-32 screws with 1/8-inch maximum penetration
and a maximum torque of 5-inch pounds. See Figure 3-1 for mounting dimensions. Allow adequate
ventilation to the drive to ensure reliable operation.