Multiplex Technology CHANNEL PLUS 3515 - Manual

Model 3515
Multi-room Video Distribution System
Installation Manual
This device complies with the FCC's Part 15 Rules for TV
interface devices. Any change or modification to this device
without the permission of Multiplex Technology, Inc. may
void the user's authority to operate this equipment.
model 3515 integrated modulator & distribution system
pll frequency control
pwr IR
Ant
/
CA
TV
INPUT
For use with model
2133 IR targets
INPUTS MODULA
T ORS
OUTPUTS T o
TVs
PERFORMANCE MULTI-ROOM VIDEO
3001 Enterprise Street, Brea, CA 92821-6213, U.S.A.
714-996-4100 * 800-999-5225 * FAX 714-996-4900 * www.channelplus.com
multiplex
technology, inc.
®
Channel
® Controls and Connections
This ChannelPlus model 3515 video distribution system contains a digitally-tuned
video modulator that converts any baseband video and audio signal to a user-
selected UHF, or Ultraband CATV channel. An internal quartz crystal reference
oscillator and PLL circuitry ensure drift-free performance. The user selects the
output frequency (channel) using the "program" button to enter the number of the
desired channel. Optionally, the model 3515 may be programmed by a computer
running Windows 95. Any TV connected to the output via coax can receive the
signals, when the TV is tuned to the proper channel.
Model 3515 - Modulator section
Model 3515 - RF section
RF output Program switch to enter
the channel number
(Use a paper clip)
IR LED shows
when IR data is
being transmitted
Power LED also
aids in programming
Video input
Audio loop-thru
Power supply
15VDC 300mA
Audio input:
Right and left are
combined for monaural
Outputs for IR emitter
Connection for
Modulator Section
(Requires coax cable,
RG-6 recommended)
Expansion input
for other modulators
(25dBmV max)
Input for cable or antenna
Outputs for TVs (8)
2
}
OUTPUT
OUT IN
AUDIO
POWER
15VDC
300mA
VIDEO IR
Programming the model 3515 by computer:
Y a computer
running Windows 95. You will need to download the instructions from our web site,
http://www.channelplus.com. The files are located in the “Integrated Modulator“ section.
Run the program to extract the files and follow the instructions in the readme.txt file.
You must have a sound card capable of generating ‘wav’ files.
An audio loop thru is provided so that the 3515 may be placed between the computer and
speaker system.
ou may program the channel assignment from a front panel switch or by
model 3515 integrated modulator & distribution system
pll frequency control
pwr IR
model 3515 integrated modulator & distribution system
pll frequency control
pwr IR
Ant
/
CA
TV
INPUT
For use with model
2133 IR targets
INPUTS MODULA
T ORS
OUTPUTS T o TVs