Master Bilt Combination Heater/Proofing Cabinet Non-insulated HP6A-LX Series - Manual

ITEM NO. ______________________________________________________
PROJECT ______________________________________________________
LOCATION _____________________________________________________
DATE _________________________ QTY. ___________________________
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
CONSTRUCTION
• Multi-purpose design provides
heat for holding as well as heat
and humidity for proofing. Also
serves as a mobile heated trans-
port cabinet.
• 14 gauge aluminum body and 14
gauge galvanized caster base
• Removable, dual purpose ther-
mostatically controlled hold-
ing/proofing unit with external
controls and 12 hour timer for
proofing mode
• Can be used with or without
water
• Condensation drip trough,
removable for cleaning
• Adjustable damper
• Removable louvered back
mounted air tunnel for even
heat distribution
• Five-inch swivel plate casters
with modulus wheels (two with
brakes)
DOOR
• 270° door swing
• Hinged right
• Field reversible
• Positive latch handle
CLEARANCE
• Minimum of 4" clearance re-
quired on cabinet back and sides
THERMOSTAT RANGE
• Heating: 80° to 185°F
(27° to 85°C)
• Proofing: 80° to 135°F
(27° to 57°C)
PANS
• Maximum ledge load: 30 lbs. per
ledge
• Standard ledge spacing: 3" or
4 1 /
2
"
• Ledge spacing can also be ad-
justed to 3 3 /
4
", 5 1 /
4
", 6" and 6 3 /
4
"
without additional ledges
• Optional ledge kit allows 1 1 /
2
"
spacing
• Pan/tray accomodations:
–18" x 26"
–18" x 13"
–12" x 20"
WARRANTY
• Limited one year parts and labor
FEATURES
HP6A-LX
HP6A-LX SERIES
Combination
Heater/Proofing Cabinet,
Non-insulated
OPTIONS
❑ 1 1 /
2
" spaced ledge kit
MODEL
❑
HP6A-LX