Memorex 53958662 User Manual
Page 3
Step 2 – Using Your FlashDrive:
Your new Memorex USB Flash Drive is ready to use now. Follow the
simple steps below to begin using your new portable storage device:
a. Remove the protective snap-on cap and insert your new
Flash Drive into an available USB port on your computer.
Note:
You may be required to wait a few minutes while your new Flash Drive is configuring
itself to your computer system. (Click "OK" or "Agree" to any driver prompts should they
appear).
b. Restart your computer now to ensure driver installation and
drive setup.
c. At the desktop screen double-click on “My Computer.” The
Flash Drive should appear as a “Removable Disk” icon. The actual
drive letter assigned to your Flash Drive will vary depending on how
many other drives are on your system.
You are ready to begin using your new Memorex USB Flash Drive.
Congratulations!
• Choose "Yes, I want to restart my computer now" and click OK to
reboot your computer to complete the driver installation process.
e. Your Memorex USB Flash Drive is now ready to use. When you
insert the drive into an available USB port on your computer, your
system will identify the drive, locate the driver software, and complete
the driver installation process.