Mercedes-Benz 2004 E 320 - Manual (Page 362)

362
Practical hints
Replacing bulbs
High beam halogen bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 281).
̈ Press the clamp and remove headlamp
cover.
̈ Pull electrical connector off.
̈ Turn the locking mechanism counter-
clockwise and take out the high beam
bulb 2.
̈ Insert the new bulb in the socket so
that the base is in the recess on the
lower left.
̈ Attach the retaining springs.
̈ Insert connector into the bulb.
̈ Align headlamp cover and click into
place.
Front turn signal lamp bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 281).
̈ Twist bulb socket 1 counterclockwise
and pull out.
̈ Push bulb into socket, turn counter-
clockwise and remove.
̈ Insert new bulb in socket, push in and
twist clockwise.
̈ Reinsert bulb socket in lamp and twist
clockwise.
Parking and standing lamp bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 281).
̈ Press the clamp and remove headlamp
cover.
̈ Pull out the bulb socket 3 with the
bulb.
̈ Pull the bulb out of the bulb socket.
̈ Insert a new bulb in the socket.
̈ Reinstall the bulb socket.
̈ Align headlamp cover and click into
place.