Marathon Shredder - Manual (Page 11)

Page 11
MALFUNCTION PROBLEM SOLUTION
Shredder won’t operate No electrical power to unit Plug shredder cord into
electric receptacle
Thermal overload could
be tripped
Check thermal overload on
rear of cabinet
Emergency Stop Switch is
in wrong position or
illuminated
Depress “Emergency Stop
Switch” light should turn off
and shredder should
operate
Collection bag is full Remove and replace bag
“Emergency Stop Switch”
is flashing
Collection bag is full
Shredder will not operate
in automatic mode
Shredder operates only
with manual switches
Photo eye needs cleaned,
adjusted or replaced
Shredder reverses
continuously
Shredder jam proximity
switch is faulty or out of
adjustment
Adjust or replace proximity
switch
Shredder will not reverse Shredder jam proximity
switch is faulty or out of
adjustment
Adjust or replace proximity
switch
TROUBLE SHOOTING GUIDE