Muratec F-116 - Manual (Page 69)

Supplies and accessories_ 68
To purchase maintenance parts, contact your local Muratec dealer.
Replacing maintenance parts can be performed only by an authorized Muratec dealer.
The warranty does not cover the replacement of any maintenance parts after their lifespan.
Replacing the toner cartridge
Click this link to open an animation about replacing a toner cartridge.
When a toner cartridge has reached its estimated cartridge life:
• End of life Replace new cart appears on the display.
• The machine stops printing. Incoming faxes are saved in memory.
At this stage, the toner cartridge needs to be replaced. Check the type of the toner cartridge for your machine (See
"Available supplies" on page 67).
1.
Open the front door.
2. Pull the toner cartridge out.
3. Remove the new toner cartridge out of its package.
4. Remove the paper protecting the toner cartridge by pulling the packing tape.
PARTS AVERAGE YIELD a
a. It will be affected by media type, media size and job complexity.
PART NAME
Document feeder rubber pad Approx. 10,000 pages
White roller Approx. 50,000 pages
Fuser unit Approx. 50,000 pages
Pickup roller Approx. 50,000 pages
Cassette pad unit Approx. 50,000 pages