MITSUBISHI ELECTRIC NETCOMMAND 2.0 HD-5000A - Manual (Page 13)

13
Remote Control Buttons: Device Menu Button
Device Menu Button
(Figure 13)
The DEVICE MENU button displays the Transport
Menu for playback devices. A second press of this button
will display the menus for NetCommand® compatible
IEEE  devices. Menu access varies by device.
While watching a NetCommand compatible traditional
IR controlled or an IEEE  device, press the DEVICE
MENU button once or twice, to display the menu for that
device.
When the Device Selection menu is displayed, and a HAVi
IEEE  device is highlighted, pressing the DEVICE
MENU button will automatically display the menu for
that device over the current source. The HAVi IEEE 
device does not need to be the current source. Some IEEE
 devices do not have a menu to display. Check with
the Owner’s Guide of the IEEE  device.
When the menu for the device has been displayed, to
navigate, use ADJUST , , , and ENT(er) buttons.
For some NetCommand traditional devices you will also
be able to use the number buttons and other additional
buttons.
For traditional DVD players, the Device Menu is also
known as the setup menu.
�����
����� ���
�
�
�
��
������
����
�������
���
������
������
�
�
���
�
�����
�
�
�
�
����
�������
����
���� ������ ��� ���
������� ������
����
����
���� �����
���� ������ ����� �����
���������� �������
�� �����
������������� ��� ����
�������
Figure 13. Remote Control
GUIDE
Button
ENT(er)
Button
Transport
Control
Buttons
DEVICE
MENU
Button
ADJUST
Buttons
REC
Record
Button