Magellan Maestro 4215 - Manual (Page 56)

Setting User Options 48
Using the Simulator
When turned on, the simulator will offer the option of simulating movement on a route. Useful for
learning about the Magellan Maestro while not driving.
1. From page 2 of the Main Menu, tap User Options.
2. Tap Simulator Mode.
3. Tap Propose simulator mode when calculating
route. When checked, the Magellan Maestro will
ask if you want the route simulated when it is
created. Simulation mode will ignore actual
movement and should only be used for training
purposes.
Tap on the desired speed factor.
Tap <<1mi or 1mi>> to move the route forwards
or backwards 1 mile.
Tap Restart to restart the route you are currently
simulating from the beginning.
Tap Stop stop the current route simulation.
(The Simulate button is currently not active.)
4. Tap Back arrow to record the changes and exit.
Setting Tone Options
Provides a way of selecting the tone used to announce arrival at a segment or destination.
1. From page 2 of the Main Menu, tap User Options.
2. Tap Tone Options.
3. Select Bell, Chime or Beep.
4. Tap Save to record the changes and exit.
Simulator Mode Screen