Minolta PAGEWORKS 20 - Manual (Page 127)

6-5
Chapter 6
Installing Options
Installing the network card enables you to connect the printer to a
local area network (LAN) using an Ethernet network.
WARNING
The network card is easily damaged by static electricity.
Touch something metal before you touch the network card.
- Take the network card out of the shipping box.
- Turn the printer off and then disconnect the power cord and inter-
face cable from the printer.
1. Loosen the two thumbscrews to
remove the network cover on the
backside of the printer.
2. Insert the network card into the
opening at the back of the printer.
The rails on the inside of the
opening guide the network card
to the connector at the back of the
opening.
Make sure it is seated firmly.
Tighten the two thumbscrews to
secure the network card in the
printer.
When transporting the printer, the
removed cover and screws are
needed. Keep them safe.
3. Installing the Network Card
NOTE
Options6.frm 5 ページ ２００３年１１月１８日 火曜日 午前９時５２分