Philips Magnavox MAS-100/37 - Manual (Page 19)

19
English
8240 009 34231
Radio Reception
Tuning to radio stations
1 Press TUNER to select TUNER mode.
➜ "TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the
display.
➜ If an FM station is received in stereo, is
displayed.
2 Press TUNER again to select the desired
waveband : FM or AM.
3 Press and hold à or á until the frequency
indication starts to change, then release.
➜ The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
4 Repeat step 3 if necessary until you find the
desired radio station.
● To tune to a weak station, press à or á briefly
and repeatedly until optimal reception is found.
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
Automatic Preset Programming
● Plug and Play setting (refer to “Basic Functions -
Plug and Play”).
OR
1 Press TUNER to select TUNER mode.
To begin automatic preset from a desired
preset number
● Press í or ë to select the desired preset
number.
➜ If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
2 Press and hold PROGRAM until " AUTO" is
displayed.
➜
PROG starts flashing.
➜ All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by AM band.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To stop storing the automatic preset
● Press PROGRAM or Ç on the system.
Note:
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
3 CD DIRECT PLAY
STANDBY-ON
OPEN•CLOSE
CD
DISC CHANGE DIGITAL SOUND
CONTROL DYNAMIC
BASS BOOST
CD 1 CD 2 CD 3
SEARCH /
T U N I N G SEARCH /
T U N I N G
FM•AM TAPE 1•2
CLOCK•TIMER PROGRAM DIM
TUNER TAPE
DSC
DEMO STOP
2
PREV•PRESET ▲ ▲ NEXT•PRESET
VOLUME
DBB