MicroBoards Technology Copywriter Flash Duplicator - Manual (Page 6)

6
Hardware Description
The Copywriter Flash Duplicator consists of a reader port, 3, 7, or 11 flash drive ports and
Controller module.
The master card will always be inserted into the TOP LEFT port, which is outlined.
The blank cards will always be inserted into the remaining ports.
The green LEDs above each port will flash when in use or will stay solid green after a successful
duplication. The red LED above each port will light when an error on that card occurs.
The LCD display will show the different menu selections and also information pertaining to the
recording process. Here is a typical example of what is displayed during the COPY process:
Reader
Port
Recorder Ports
(all ports below the first
row are also recorder
ports)
Controller Interface
and Display
Power Switch
Displays the function being performed, such as
Copying or Comparing
Shows the size
of the Master
Displays the
completed percentage
Shows how much data
has been copied
Copywriter USB
11 Flash
Duplicator
Displays the
amount of
time passed
▲ Navigate through
▼ the menu options
OK Accept the
menu item
showing
ESC Exit from the
menu item
showing