MACKIE PROFESIONAL EFFECTS MIXER WITH USB PROFX22 - Manual (Page 2)

2/7 PAGES
PROFESSIONAL EFFECTS
MIXERS WITH USB
ProFX16 and
ProFX22
ProFX16 and ProFX22 SPECIFICATIONS
Noise Characteristics
Equivalent Input Noise (EIN)
(mic in to insert send out, 150 source impedance,
20 Hz to 20 kHz)
max gain
–128 dBu
Residual Output Noise
All outputs, master levels off, all channel levels off
–95 dBu
All outputs, master levels unity, all channel levels off –85 dBu
All outputs, master levels unity, one channel level unity –85 dBu
Frequency Response
Mic input to any output
(gain at unity, +0 dB / –1 dB)
20 Hz to 40 kHz
Distortion (THD+N)
(20 Hz to 20 kHz bandwidth)
Mic in to Main out (+4 dBu output)
<0.01%
Attenuation and Crosstalk
Adjacent Inputs, 1 kHz –90 dB
Fader Off, 1 kHz –75 dB
Mute Switch/Break Switch Mute, 1 kHz –100 dB
Common Mode Rejection Ratio (CMRR)
Mic In to Main Out, max gain, 1 kHz 70 dB
Maximum Levels
All inputs +22 dBu
Main Mix XLR +28 dBu
All other outputs +22 dBu
Impedances
Mic In 3.3 k
Channel Insert Return 10 k
All other inputs 20 k
Tape output 1 k
Phones output 25
All other outputs 120
Equalization
Mono Channels
Low
±15 dB @ 80 Hz
Mid ±15 dB
100 Hz – 8 kHz
High ±15 dB @ 12 kHz
Low Cut Filter 18 dB/octave @ 100 Hz
Stereo Channels
Low
±15 dB @ 80 Hz
Mid ±15 dB @ 2.5 kHz
High ±15 dB @ 12 kHz
Maximum Voltage Gain (EQ Flat)
Mic input Channel to
Insert Output 50 dB
Tape Output 60 dB
USB Output 50 dB
1/4" Main Output 70 dB
XLR Main Output 76 dB
Monitor Send 85 dB
FX Send 90 dB
Mono Line Input Channel to
Insert Output
30 dB
Tape Output 40 dB
USB Output 40 dB
XLR Main Output 56 dB
Monitor Send 65 dB
FX Send 70 dB
Stereo Line Input Channel to
Tape Output
30 dB
USB Output 30 dB
XLR Main Output 46 dB
Monitor Send 55 dB
FX Send 60 dB
Tape Input to
XLR Main Output
36 dB
USB Input to
XLR Main Output
36 dB
Stereo Return to
Mon Output
30 dB
XLR Main Output 26 dB