Motorola CLS1110 CLS1410 - Manual (Page 9)

Gettin
g Star
ted
15
Installing the Batteries
Your radio uses a rechargeable Lithium Ion (Li Ion) battery or 3 AAA alkaline batteries
with the 56564 AAA Battery Tray (not included with all models).
Li Ion Battery
1. If the battery door is already in place, push down on the
recess on the door and slide it off the radio.
2. Insert the battery, printed arrows first, into the battery
compartment and press down to secure firmly in place.
3. Slide and snap the battery door into place.
AAA Alkaline Batteries
1. If the battery door is already in place, push down on the
recess on the door and slide it off the radio.
2. Insert 3 AAA batteries into the battery tray as shown by
the markings inside the tray.
3. Insert the battery tray into the battery compartment and press down to secure
firmly in place.
4. Slide and snap the battery door into place.
5. Press S until A or n flashes (this menu does not appear if using a Motorola
Li Ion battery).
6. Press [ or ] to select A for alkaline batteries, or n for rechargeable AAA cells.
Gettin
g Star
ted
16
Charging the Battery
Use only the charger supplied with the radio, or other _Series power
accessories. For optimum battery life, do not charge the battery for prolonged periods
after it is fully charged. Charging the battery over the weekend is acceptable.
Using the Drop-in Charger
1. Place the charger on a flat surface.
2. Insert the plug of the power cord into the jack
on the charger.
3. Plug the cord into an AC outlet.
4. Turn the radio off. If the radio is on while
charging, it will take longer to fully charge.
5. Insert the radio (with battery installed) into
the front charging pocket.
Note: The radio will fit in the charger with the
holster on.
The drop-in charger will also sequentially charge a spare SNN5571 Li Ion battery.
The spare battery will not begin to charge until the radio battery is fully charged. Both
batteries will charge in approximately
2–6 hours.