Mamiya PRO 645 - Manual (Page 27)

1. Giving the Film Advance Crank
one complete turn, will cock the
shutter and mirror and ready the
camera for the next exposure.
2. When the film is completely ex-
posed (15 exposures on 120, 30 on
220 film), the crank stop will disen-
gage. Continue turning until the pa-
per trailer is completely wound onto
the take-up spool. (About five turns
after the last exposure.)
* Move the empty spool from the
top to the lower (take-up) com-
partment, ready for loading the
next film roll.
* Never load, unload or handle
film in direct sunlight.
3. Open the Back Cover. and re-
move the Roll Film Insert. The Expo-
sure Counter will return to S (start)
automatically.
4. Pull the Spool Clip on the roll film
insert out to remove the film.
5. Remove the film from the roll film
insert; make sure that the film on the
roll does not loosen, and seal imme-
diately.
26