Motion Computing C5 - Manual (Page 35)

Chapter 3 Using the Motion C5 33
Charging the battery
When the C5 is connected to AC power, the battery automatically charges until it reaches
full charge, whether the unit is on or off.
For information about the battery status light, see “Status lights” on page 8.
DANGER: To avoid injury, keep the battery within the recommended temperature range
when charging it. If the battery has been subjected to extreme temperatures, wait until it
cools to room temperature before recharging it. For more information, see the Safety and
Regulatory Guide packaged with the C5.
Removing and replacing the battery
Before you remove the battery, ensure that the C5 is plugged in, turned off, or in Hibernate
or Standby mode (page 31).
To remove the battery
1. With the back of the unit facing you, slide and hold the battery latch.
2. Insert your finger under the finger grip and remove the battery from the battery
compartment.
1
2