Marantz RC9500 - Manual (Page 28)

User Guide
24
Customizing Your RC9500
Macros Send Commands To Your System
You can make any or all of the 250 steps send a remote control
command to your system. The step is actually just a recording
of the location of any button on any device page. To record an
Remote Control (RC) command, you simply navigate to the
panel and button you want, then touch it. Thus, all RC
commands in a Macro must first be learned to a button location.
(see page 43)
You can record a “Device Action”. A Device Action executes the
device action list of the selected device button in the Device
Overview. (see page 44)
Macros Can Contain Delay and Beep Between Steps
You can program a Delay/Beep as any or all of the 250 steps of
a macro. (see page 43)
You can adjust that delay in 1/10th of a second intervals
between 0.1 and 10.0 seconds. (see page 43)
DFU RC9500 Ver1_2.qxd 5/28/2004 10:33 AM Page 28