Maxtor 52049H3 - Manual (Page 3)

Before Y Before Y Before Y Before Y Before You Begin ou Begin ou Begin ou Begin ou Begin
Thank you for your interest in Maxtor hard disk drives. This manual provides technical information for OEM
engineers and systems integrators regarding the installation and use of Maxtor hard drives. Drive repair should be
performed only at an authorized repair center. For repair information, contact the Maxtor Customer Service Center
at 800-2MAXTOR or 408-922-2085.
Before unpacking the hard drive, please review Sections 1 through 4.
C A U T I O N
Maxtor hard drives are precision products. Failure to follow these precautions
and guidelines outlined here may lead to product failure, damage
and invalidation of all warranties.
11111
BEFORE unpacking or handling a drive, take all proper electro-static discharge (ESD)
precautions, including personnel and equipment grounding. Stand-alone drives are
sensitive to ESD damage.
22222
BEFORE removing drives from their packing material, allow them to reach room
temperature.
33333
During handling, NEVER drop, jar, or bump a drive.
44444
Once a drive is removed from the Maxtor shipping container, IMMEDIATELY secure
the drive through its mounting holes within a chassis. Otherwise, store the drive on a
padded, grounded, antistatic surface.
55555
NEVER switch DC power onto the drive by plugging an electrically live DC source cable
into the drive's connector.
NEVER connect a live bus to the drive's interface connector.
66666
ELECTRICAL GROUNDING - For proper operation, the drive must be securely fastened
to a device bay that provides a suitable electrical ground to the drive baseplate.
Please do not remove or cover up Maxtor factory-installed drive labels.
They contain information required should the drive ever need repair.