MITSUBISHI ELECTRIC UNISEN 164 SERIES - Manual (Page 15)

2. TV Connections 15
For assistance call 1(800) 332-2119
A/V Receiver
Most setups require either an optical audio cable or
analog stereo audio cables. To send audio from TV
channels received on the
ANT input or devices con-
nected directly to the TV, you must use one of the con-
nections shown below.
The TV makes all audio available in digital and analog
formats:
Analog audio coming into the TV is available as •
output in digital stereo format on the DIGITAL
AUDIO OUTPUT jack.
Digital incoming audio is available as analog output •
on the AVR/SURROUND L and R jacks.
COAXIAL
INPUT
OPTICAL
INPUT
OPTICAL
INPUT
AUDIO
R L
or
Optical cable
(digital A/V
receiver)
Stereo analog cables
(analog A/V receiver)
A/V receiver back panel
A/V Receiver with HDMI Output
Required: One HDMI-to-HDMI cable
This option allows you to view content from devices
connected to an A/V receiver. The A/V receiver can
send audio and video to the TV over a single HDMI
cable. You can use an HDMI connection as described
here in addition to an audio connection from the TV’s
audio output. The optional audio connection allows you
to hear, through the A/V receiver, devices connected to
the TV only, e.g., an antenna on the
ANT input.
HDMI cable
HDMI OUT OPTICAL
AUDIO IN ANALOG AUDIO IN
L R
High-definition
DVD player
DVD player
Cable box
VCR
Y/ VIDEO
TV
A/V receiver with
HDMI output
Any connection
types
Optional
analog or
digital audio
connection