MicroBoards Technology PF-2 - Manual (Page 7)

Loading Discs
The next step is to load your Print Factory with discs. The system will accept CD or DVD 12 cm inkjet printable discs. If
the disc does not have an inkjet printable surface, the ink will not adhere to the surface of the disc. The Print Factory will
only accept 12 cm discs. Business card or 8 cm discs are not supported by this system.
Figure 1 Figure 2
Load the first 5 or 6 discs flat, as seen in figure 1.
Load the rest of the discs at an angle, as seen in figure 2.
The Print Factory will hold a maximum of 50 discs. DO NOT load more than 50 discs in the system, as this will cause the
discs to feed incorrectly.
Align Disc
There are factory default numbers for the TOP and LEFT values for your printer. These can be found on a label, under the
printer cover. You may need to adjust the values, depending on the images you are printing.
In Utilities Tab, select Print Align Disc.