Melissa 645-096 User Manual

Page 2

Advertising
background image

2

3

UK

INTRODUCTION
To get the best out of your new kettle, please read
through these instructions carefully before using it
for the first time. Pay particular attention to the sa-
fety measures. We also recommend that you keep
the instructions for future reference, so that you
can remind yourself of the functions of the kettle.
SAFETY MEASURES
Normal use of the kettle
• Incorrect use of the kettle may cause personal

injury and damage to the kettle.

• Use the kettle for its intended purpose only.

The manufacturer is not responsible for any da-
mage resulting from incorrect use or handling
(see also Guarantee Terms).

• The kettle may only be connected to 230 V, 50

Hz.

• The kettle should not be switched on unless

there is water in it.

• The kettle or cord must not be placed in water

or any other liquid.

• Never leave the kettle unattended when in use

and keep an eye on children.

• The water level in the kettle must not exceed

the maximum filling level (MAX 1.7L) marked on
the water level gauges.

• This kettle is not suitable for commercial or

outdoor use.

Positioning the kettle
• Always place the kettle at the back of a kitchen

counter and at a safe distance from flammable
objects such as curtains, tablecloths or similar.

• Always place the kettle so that the spout is tur-

ned away from any other surfaces as the steam
from boiling water may damage them.

• Do not cover the kettle.
• Do not allow the cord to hang over the edge of

the counter, and keep it away from hot objects
and naked flames.

• Return the kettle to its base after use.

Cord, plug and mains socket
• Check regularly that the cord is not damaged

and do not use the kettle if it is, or if it has been
dropped or damaged in any other way.

• If the kettle, cord or plug is damaged, it must

be inspected and, if necessary, repaired by an
authorised repair engineer, otherwise there is
a risk of electric shock. Never try to repair the
appliance yourself.

• Remove the plug from the socket for cleaning.
• Avoid pulling the cord when removing the plug

from the socket. Instead, hold the plug.

• Check that it is not possible to pull or trip over

the kettle or any extension cord.

KEY

1. Pouring spout
2. Lid
3. Water level gauge (one on each side)
4. Indicator light
5. On/off button
6. Switch
7. Base
8. Removable limescale filter
PRIOR TO FIRST USE
Before using the kettle for the first time (or follo-
wing a long period without use), the kettle should
be boiled 3 times.
. Read the safety instructions through carefully.
2. Ensure that the cord is fully extended.
3. Fill the kettle with water until the water level

reaches the maximum filling level of 1.7 litres.

4. Switch on the kettle by pressing the on/off but-

ton (5) down.

5. Pour out the water once it has boiled.
6. Repeat the process described under points 3-5

three times.

USING THE KETTLE
1. Pour fresh water into the kettle. The kettle must

contain at least 0.5 l and no more than 1.7 l.

2. Place the kettle on its base (7), which should

be placed on a fixed, flat surface.

3. Switch the kettle on by pressing the on/off but-

ton (5) so that the button is depressed towards
the letter ”I”.

2.
8.

.

3.

4. 5.

6.

7.

Advertising