Munchkin Portable Hook-On Chair - Manual (Page 5)

5. Attach the table-grips (paw, hoof or hand) on the end of the arm. The table-grips
must be pushed all the way up to the indicated line. Next attach the two rubber
stops to the front of the frame. See diagram E.
ATTACHING THE CHAIR TO THE TABLE
Be sure to attach and secure the chair first before placing child in seat.
1. Make sure the two table locks (see diagram F) are angled forward.
This can be done by pressing in the red button located on the sides of both arms.
2. Check that rubber feet are not interfering with anything that could cause an
insecure fit.
3. Fit onto a table or safe, suitable flat surface as indicated in diagram F.
4. Pull the table locks in the direction shown in diagram G until you hear a clicking
sound. Make sure the table locks are perpendicular to the table top.
5. Rotate the plastic knobs in the direction shown in diagram G until the rubber
5
Table lock
F
E
Table-
Grips
Indicator mark
Rubber stops