Editing a quick text message, Keyp ad mic rophone fe ature s – Motorola 4550 User Manual
Page 80
Keyp
ad
Mic
rophone
Fe
ature
s
English
70
5
Press
N
once more to access additional options.
6
P
or
Q
to Reply and press
N
to select.
7
P
or
Q
to Write and press
N
to select.
A blinking cursor appears. Use the keypad to type your
message.
Press
P
to move one space to the left.
Press
Q
or the # key to move one space to the right.
Press the * key to delete any unwanted characters.
8
Press
N
once message is composed.
9
The display shows Text Message: <Subscriber/Group
Alias or ID>, confirming your message is being sent.
10
If the message is sent, a tone sounds and the display shows
Message Sent.
OR
If the message is not sent, a tone sounds and the display
shows Message Send Failed.
If the text message fails to send, the radio returns you to the
Resend
option screen (see Managing Fail-to-Send Text
Messages on page 43 and page 72).
NOTE: If a subject line is present (for messages received from
an e-mail application), you cannot edit it.
Editing a Quick Text Message
Procedure:
Press the programmed Text Messaging button and proceed to
Step 3.
OR
Follow the procedure below.
1
S
to access the menu.
2
P
or
Q
to Messages and press
N
to select.
3
P
or
Q
to Quick Text and press
N
to select.
4
P
or
Q
to the required Quick Text and press
N
to
select.
5
A blinking cursor appears. Use the keypad to edit the
message.
Press
P
to move one space to the left.
Press
Q
or the # key to move one space to the right.
Press the * key to delete any unwanted characters.
6
Press
N
once message is composed.
NAG_6880309T15.book Page 70 Tuesday, March 9, 2010 11:47 AM