Motorola 4550 - Manual (Page 62)

Advanced Features
English
52
NOTE: You cannot manually add or delete an entry to the
Members list. Check with your dealer or system
administrator for more information.
Starting an Automatic Site Search
NOTE: The radio only scans for a new site if the current signal
is weak or when the radio is unable to detect any signal
from the current site. If the RSSI value is strong, the
radio remains on the current site.
Procedure:
Press the programmed Site Lock On/Off button.
1 A tone sounds and the display shows Site Unlocked.
2 The yellow LED blinks rapidly when the radio is actively
searching for a new site, and turns off once the radio locks
on to a site.
3 The display shows the site roaming icon and channel alias.
OR
Procedure:
Use the menu.
1 S to access the menu.
2 P or Q to Utilities and press N to select.
3 P or Q to Radio Settings and press N to select.
4 P or Q to Site Roaming and press N to select.
5 P or Q to Unlock Site and press N to select. A tone
sounds and the display shows Site Unlocked.
6 The radio returns to the Home screen. The display shows
the site roaming icon and channel alias.
7 The yellow LED blinks rapidly when the radio is actively
searching for a new site, and turns off once the radio locks
on to a site.
The radio also performs an automatic site search (site is
unlocked) during a PTT button press or data transmission if
the current channel, an IP Site Select channel with an attached
roam list, is out of range.
Stopping an Automatic Site Search
When the radio is actively searching for a new site:
Procedure:
Press the programmed Site Lock On/Off button.
1 A tone sounds and the display shows Site Locked.
2 The LED turns off and the display shows the channel alias.
OR


NAG_6880309T15.book Page 52 Tuesday, March 9, 2010 11:47 AM