Motorola 4550 - Manual (Page 64)

Advanced Features
English
54
Security
You can enable or disable any radio in the system. For example,
you might want to disable a stolen radio, to prevent the thief
from using it, and enable that radio, when it is recovered.
NOTE: Performing Radio Disable and Enable is limited to
radios with these functions enabled.
Radio Disable
Procedure:
Use the programmed Radio Disable button.
1 Press the programmed Radio Disable button.
2 P or Q to the required subscriber alias or ID and press
N to select.
3 The display shows Radio Disable: <Subscriber Alias
or ID> and the green LED lights up.
4 Wait for acknowledgment.
5 If successful, a tone sounds and the display shows Radio
Disable Successful.
OR
If not successful, a tone sounds and the display shows
Radio Disable Failed.
OR
Procedure:
Use the menu.
1 S to access the menu.
2 P or Q to Contacts and press N to select. The
entries are alphabetically sorted.
3 P or Q to the required subscriber alias or ID and press
N to select.
4 P or Q to Radio Disable and press N to select. The
green LED blinks.
5 The display shows Radio Disable: <Subscriber Alias
or ID> and the green LED lights up.
6 Wait for acknowledgment.
7 If successful, a tone sounds and the display shows Radio
Disable Successful.
OR
If not successful, a tone sounds and the display shows
Radio Disable Failed.
Do not press R during the Radio Disable operation as you
will not get an acknowledgement message.
You can also access this feature using manual dial (see Radio
Disable via Manual Dial on page 74).

NAG_6880309T15.book Page 54 Tuesday, March 9, 2010 11:47 AM