Making a call alert by manual dial, Text messaging, Writing and sending a text message – Motorola 4550 User Manual
Page 78: Keyp ad mic rophone fe ature s
Keyp
ad
Mic
rophone
Fe
ature
s
English
68
4
P
or
Q
to the required missed call alias or ID and press
N
to select.
5
P
or
Q
to Store and press
N
to select.
6
A blinking cursor appears. If needed, key in the alias for that
ID and press
N
.
7
The display shows Contact Saved.
You can also store an ID without an alias.
Making a Call Alert by Manual Dial
Procedure:
1
S
to access the menu.
2
P
or
Q
to Contacts and press
N
to select.
3
P
or
Q
to Manual Dial and press
N
to select.
4
A blinking cursor appears. Enter the subscriber ID you want
to send the Call Alert to and press
N
.
5
P
or
Q
to Call Alert and press
N
to select.
6
The display shows Call Alert: <Subscriber ID>,
confirming that the Call Alert has been sent.
7
The green LED lights up when your radio is sending the Call
Alert.
8
If the Call Alert acknowledgement is received, a tone
sounds and the display shows Call Alert Successful.
OR
If the Call Alert acknowledgement is not received, a tone
sounds and the display shows Call Alert Failed.
Text Messaging
The maximum length of characters for a text message,
including the subject line (seen when receiving message from
an e-mail application), is 138.
The radio exits the current screen once the inactivity timer
expires. Any text message in the writing/editing screen will
automatically be saved to the Drafts folder.
NOTE: Long press
R
at any time to return to the Home
screen.
Writing and Sending a Text Message
Procedure:
Press the programmed Text Messaging button and proceed to
Step 3.
OR
Follow the procedure below.
1
S
to access the menu.
NAG_6880309T15.book Page 68 Tuesday, March 9, 2010 11:47 AM