Middleby Marshall PS640E - Manual (Page 20)

NORMAL OPERATION - STEP-BY-STEP
A. Main Screen
1. When the unit has been “OFF” for more than 1 minute
the controller will display the screen saver, as shown in
Figure 3-1. To start operation, push the “Enter/Reset”
button. The controller will display the “OFF” screen, as
shown in Figure 3-2.
3. To change the temperature, push the “TEMP” button. The
controller will display the screen, shown in
Figure 3-4. To change the temperature, push the “
← ← ← ← ←”
arrow button. Then push either the “ ↑” arrow or “↓” arrow
buttons to increase or decrease temperatures respec-
tively. When the proper temperature is entered, push the
“Enter/Reset” button. The controller will now show the
display shown in Figure 3-3.
2. Push the “ON/OFF” button to start the oven. The con-
troller will display the screen, as shown in Figure 3-3.
Figure 3-1 Screen Saver
©2005 Middleby Corporation,All rights reserved
The Middleby Corporation
1400 Toastmaster Drive
Elgin, IL 60120
Phone: 847-741-3300
Fax: 847-741-0015
The Middleby Corporation
BELT 01 SPEED
OFF
4m
.
30s
.
450 F
Figure 3-2 Main Screen OFF
Figure 3-3 Main Screen ON
TEMPERATURE SET UP
ON
ACTUAL TEMP
450.0 F
133.8 F
Figure 3-4 Temperature Screen
TEMP Set button
FRONT BELT JAMMED
BELT 01 SPEED
ON
4m
.
30s
.
450 F
ON/OFF button
16