MITSUBISHI ELECTRIC CP3020DE User Manual
Page 15
14
CONNECTIONS
PRECAUTIONS
FEA
TURES
PREP
ARA
TION
TROUBLE-
SHOOTING
OTHERS
BEFORE OPERATION
USAGE AND STORAGE OF PAPER SHEET SET
2
BEFORE PRINTING
•
Fingerprints or dust on the paper’s surface may degrade print quality and cause paper jams.
•
When print paper is rapidly transferred from a cool place to a hot place, vapour or dew will be
generated on the paper’s surface causing paper jams or degraded print quality. Leave the
print paper in the room to stabilize its temperature before
use
.
•
When print paper or ink sheet runs out during printing, the printing operation stops and the
MEDIA indicator blinks. Set new ink sheet or print paper.
•
Do not use wet or damaged paper. It may cause malfunction.
•
Avoid touching or pulling the ink sheet with fingers. It may degrade the print quality.
•
When the ink sheet is exhausted, replace it with a new one. Used ink sheet is not reusable.
• Do not open the print paper and ink sheet until
you are ready to
use them.
•
The
paper sheet set is a combination of ink sheet and print paper. Use the combination
provided in the box. If the combination is changed, malfunction may occur.
2
2
2
2
2
AFTER PRINTING
• When the printed paper is touched
with
a wet hand, the print may be discoloured.
•
Fading may occur if the print-face is exposed to organic chemical agents which may affect
print paper (e. g. alcohol, ester, ketone based).
•
Fading will be accelerated upon contact with PVC-based materials (e. g. adhesive tapes,
rubber erasers, etc.).
•
Do not put a print back into the paper tray. Doing so can cause jams and loss of completed
prints.
•
Store prints in a cool, dry environment free of chemical contamination. Avoid exposure to
high intensity light sources, particularly fluorescent light and sunlight, which are
high
in
ultraviolet radiation.
2
2
2
2
2
STORAGE OF PAPER SHEET SET
• Leaving the print paper in contact with PVC-based materials causes
the
print paper to
discolour or become
stained.
•
Never store print paper close to heaters or in hot, humid or dusty places
.
Keep print paper in a place where;
Temperature : 5
°
C - 30
°
C (41
°
F - 86
°
F)
Humidity
: 20% - 60%RH