MIDLAND GXT1000 series - Manual (Page 19)

Page 19 www.midlandradio.com
DUAL WATCH FUNCTION
Your GXT1000/1050 Series has a DUAL WATCH function, to enable
user to scan 2 channels for any activity. The first channel will be the
current channel setting and the second channel will be the selected
channel on the MENU.
To turn the DUAL WATCH on, press the MENU button until the “oF”
icon appears blinking on the left of the display, while the “dU” icon
appears on the left. Select the second channel by pressing the
button. Press again the MENU and the button to choose the
Privacy Code (oF/dc/ct). Then press again the MENU and button
to set the Privacy Code. Pls. note that the Privacy Code could be
set only on Ch1~22. To confirm, press the PTT button or press
MENU.
The RX and TX icon will appear at the same time to signify that the
DUAL WATCH function is on and the radio will start to scan both the
current channel/code-in-use and the selected channel/code and stop
on any active channel. Your radio will resume scanning after 4
seconds when the channel is no longer active.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel for 10
seconds before resuming scan when PTT button is no longer pressed.
To resume scanning, quickly press the
button.
To turn the DUAL WATCH function off, press the SCAN button.
EXTERNAL SPEAKER/MICROPHONE JACK
Your GXT1000/1050 Series can be used with an
optional external speaker/microphone or headset,
freeing your hands for other tasks. To use an
optional speaker / microphone or headset:
l Open the rubber cap on the side of the radio.
l Insert the plug(s) into the SPK/MIC jacks
l Place the earbud into your ear, and adjust the
mic into your desired position.
Note : You can charge a rechargeable NiMH
battery pack thru the CHG Jack
Model GXT1000/1050 Series
/
/ /
/