Motorola 6809521A35-B - Manual (Page 3)

Indicator Light
(steadily blue
for pairing mode)
3
PAIR
Your Headset
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Remove headset from desktop charger and
power on by sliding Power switch to the On
position (towards Power symbol on headset).
The indicator light first flashes during power
up, then initiates easy pairing. After a few
moments, the indicator light will be steadily lit
in blue to indicate headset is in pairing mode.
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
3
4
5
1
2
For most Motorola phones:
On your Motorola phone, press ( Menu ) >
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola H690.
Select OK or Yes to pair your headset with
your phone.
Enter the passkey: 0000 (for most phones)
Select OK.
When your headset successfully pairs and
connects with your phone, the indicator light
changes from steadily lit to flashing blue and
purple.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
M
4
TEST AND USE
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
Place the headset over your ear. See
"Wearing the Headset" on the reverse side
of this guide.
On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, make sure
your headset is turned ON and your phone's
Bluetooth feature is ON.
1
2
USING YOUR H690
See
Features and
Functions Guide
on the reverse side
for information on
using your H690