Magic Chef 3 TRAY MCSBS2ST - Manual (Page 8)

8
OPERATING INSTRUCTIONS
CAUTION: DO NOT FILL OVER 2/3 OF THE TRAY CAPACITY
How to use the buffet server without warming pans and frame:
1. Place the warming tray on a stable, heat resistant surface.
2. Plug the appliance into the mains power supply and switch On.
3. The indicator light will illuminate red and will switch Off when the desired temperature is
reached.
4. Pre-heat the appliance for 10 minutes.
5. The warming tray can reach a temperature of 175°F while connected; extreme caution must
be exercised.
6. Food warmed on the tray must be pre-cooked as this appliance is not designed for heating
cold or frozen food.
7. After using the appliance, unplug from the outlet and cool for approximately 90 minutes
before storing.
SHORT CORD PURPOSE
A) A short power-supply cord should be used to reduce the risk resulting from being entangled
or tripping over a longer cord. Longer detachable power-supply cord or extension cord is
available and may be used with care.
B) If a longer detachable power-supply cord or extension cord is used:
1) The marked electrical rating of the cord or extension cord should be at least as
great as the electrical rating of the appliance; and
2) The cord should be arranged so that it will not drape over the countertop or
tabletop where it can be reached by children or tripped over unintentionally.
If the appliance is of the grounded type, the extension cord should be a grounding type 3 wire
cord.