Muratec F116P - Manual

Muratec F116P Installation and Training Guide
Place a check beside each step taken.
Installation:
_____1. Remove all tape and packing materials. (Basic setup_22 in manual).
_____2. Connect handset to unit. Plug phone line into machine. Press On-hook dial
to verify presence of dial tone. (Basic setup_22)
_____3. Install printing supplies and paper. (Basic Setup_25, Media and tray_28-
30)
_____4. Make a copy to test unit (Copying_31). Send a fax and receive a fax
(Faxing_33).
_____5. Print the configuration page by pressing Menu until the display registers
[Reports]. Press the right arrow key until [Configuration] is displayed.
Press [OK].
Training:
_____1. Show customer how to program the date and time (Basic setup_23).
_____2. Show customer how to program TTI and number (Basic setup_23).
_____3. Show customer how to set paper type and size (Media and tray_28-30).
_____4. Show customer how to set sound settings (ringer, speaker, etc.) (Pg. 1.37-
1.38).
_____5. Give customer 800 # (1-800-347-3296) for assistance.
_____6. Instruct customer how to clear paper jams (Troubleshooting_53-58)