Metra Electronics 95-7337B - Manual (Page 4)

2
95-7337B KIT ASSEMBLY
B
A
DOUBLE DIN / STACKED ISO DIN HEAD UNIT
PROVISIONS
Slide the radio into the bracket/radio
housing assembly and secure using
the screws supplied with the radio.
(Figure B)
2
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
3
Reassemble dash in reverse order of
disassembly. 4
* Note: Refer also to the instructions included with the aftermarket radio.
Attach the Double DIN brackets to the
Double DIN Trim Plate. (Figure A)
1