Using the battery pack – Philips Magnavox MPD820 User Manual

Page 10

Advertising
background image

Attach the battery pack properly following
the explanation below. Make sure that the
battery pack is attached firmly to the player
when using it. Otherwise, the battery may
become detached and cause injury or
damage. Charge your battery before using.

Attaching the Battery Pack
Disconnect the AC adaptor and the power cord
from the player, before you attach the battery
pack.
1 Turn the player off.
2 Turn the player upside down.
3 Insert the battery pack's catches into the

player's corresponding holes. Then, slide
the battery pack until it is attached firmly.

TIP :

Remove the battery pack from the player
when not in use.

Detaching the Battery Pack

1 Turn the player off.
2 Disconnect the AC adaptor and the power

cord from the player.

3 Turn the player upside down.
4 Slide the battery pack's lock switch, then

slide off the battery pack as shown.

Charging the Battery Pack
We recommend you charge in room tempera-
ture (68°F) conditions. Never dispose of in fire
or water.
1 Turn the player off.
2 Attach the battery pack to the player.

3 Connect the supplied AC adaptor and the

power cord to the player. When charging
starts, the CHG indicator illuminates red.
When charging is completed, the CHG
indicator turns off.

TIP :

When charging is in progress, do not discon-
nect the AC adaptor and the power cord until
the CHG indicator turns off.

When the player is turned off, the charging
time is approximately 4.5-6.5 hours
(depending on environmental conditions).

The attached battery pack may become
warm when you are charging it or operat-
ing the player. This is normal.

A battery icon

is shown on the

screen when battery power pack is running
low.

10

Using the Battery Pack

POWER

ON

OFF

POWER

ON

OFF

POWER

ON

OFF

MPD820_17.qxd 4/2/04 9:10 AM Page 10

Advertising