Motorola MOTOPURE H15 - Manual (Page 8)

English
7
Pairing your headset
Your phone’s Bluetooth feature is off by default. To use your headset, you
must turn on the Bluetooth feature in your phone. Please check your phone’s
user’s guide.
Note : The Bluetooth feature remains on until you turn the feature off.
Before you can use your headset, you must pair (link) it with your phone.
1 Ensure headset is in pairing mode
Open the headset boom to power on the headset and initiate pairing. After a
few moments, the indicator light will be steadily lit in blue to indicate headset
is in pairing mode.
If the headset does not enter into pairing mode, see “Troubleshooting” section.
2 Set your phone to look for your headset
UК К*iАvœА“К >Ê `iۈViÊ `ˆÃVœÛiÀÞÊ vАœ“К М iК « œ˜i°К œАК `iМ>ˆÃÊ >LœÕÌÊ `iۈViÊ
discovery, consult your phone’s user’s guide. The phone lists Bluetooth
devices it finds.
UК К-iiVÌÊ Motorola H15 in the list of discovered devices and confirm by
following the on-screen prompts.
UК К7 i˜К«Аœ“«Мi`ÊLÞÊÌ iÊ« œ˜i]Êi˜ÌiÀÊÌ iÊ«>ÃÎiÞÊ0000 and confirm.
Pairing is successful when the headset indicator flashes purple and blue.
Test and use
Your phone and headset are now paired and ready to make and receive calls.
To confirm they are successfully paired and operating properly, place the
headset over your ear and make a call from your phone. You will hear ringing
from the headset.
After you have successfully paired your phone and headset, you do not need
to repeat these steps each time you use the headset.
To conserve power, close the boom to turn your headset off. Re-open the
boom to make a call.