Din head unit provision, Kit assembly – Metra Electronics 99-9224 User Manual
Page 5
Advertising
3
99-9224
KIT ASSEMBLY
DIN HEAD UNIT PROVISION
A
B
C
D
NOTE: Also refer to the instructions
included with the aftermarket radio.
Using a Phillips screw driver remove
the rear support bracket from the
radio housing. (Figure A)
1
Snap the radio housing into the radio
bracket (removed from factory radio)
and replace rear support bracket.
(Figure B)
2
Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs outward. (Figure C)
3
Slide the radio into the cage/ radio
housing assembly until it snaps into
place. (Figure D)
4
Advertising