Memorex MP3115 - Manual (Page 13)

OPERATION (CONTINUED)
12
NOTES ON PROGRAMMED PLAY:
• Programming is the ability to preselect the order in which a series of tracks
will be played.
• Each track may be stored in the program memory as many times as desired.
• As each track is played, its track number will be displayed. You can move for-
ward or backward through the programmed tracks with the Skip/Search o or
n
button.
• The CD player will stop after all programmed tracks have been played or the
STOP (■) button is pressed.
• The Program memory will be cleared when the STOP (■) button is pressed
twice, the unit is turned off or changed to another mode or when the CD door
is opened.
• To check the program, while in the Stop mode, press the PROGRAM button
and the unit will run through the programmed tracks in the display and then
revert to “01”.
It is also possible to use the Program and
Repeat functions together to repeat a
specific program indefinitely. First,
program the tracks you wish to hear in the
order you wish to hear them, as described
on page 11. Then, press the REPEAT
button twice. The PLAY/PROG indicator will
blink and the REPEAT indicator will light.
1
Press the PLAY/PAUSE (
®
/p ) button
to begin Programmed Repeat
playback; the PLAY/PROG indicator
will continue to blink and the REPEAT
indicator will light. The player will play
the tracks you selected in the order in
which you programmed them. When
the last track in the program has been
played, the entire program will begin
again.
2
1
2
PROGRAMMED REPEAT
NOTE:
Program Repeat operation will continue indefinitely until you press the STOP (■)
button. Press the STOP (■) button again to cancel both Program and Repeat.