Musical Fidelity A5 - Manual (Page 8)

Issue 1 : Wednesday, 01 March 2006 A5 DAB/FM Tuner Instructions for use Page 8 of 12
FM BUTTON FUNCTIONS
AUTO-TUNE
To auto search stations, press the AUTO
TUNE button. The tuner will search upwards
through the FM band and pick out the next
station for you. If pressed and held for more
than a second, the tuner will scan back down
the band to the previous station (the scan-
down function is not available on the remote).
BAND
This button alternates the tuner between
receiving FM and DAB stations
TUNE UP/DOWN
To manually tune a station, press and hold
down the TUNE UP or TUNE DOWN button
to scan up and down the FM band When the
required station frequency is displayed, release
the TUNE button Pressing buttons briefly
gives fine-tuning steps (50kHz).
See the section on the PRESET buttons to
store favourite stations for easy recall
PRESET UP and PRESET DOWN
PRESET UP/DOWN buttons are used to
select one of ten FM preset memory locations.
Press select when the desired preset is
displayed.
STORE
It is possible to store favourite stations in
preset memory locations using the STORE
button as follows:
1 Tune to the station required.
2 Press PRESET UP/DOWN
buttons until the desired preset. is
displayed. Press the STORE to
accept this preset. The display
revert to the selected station
Note: this will overwrite any station stored
previously on this preset.
Briefly pressing the button will display current
preset without storing.
There are 10 presets available for programmes
on the FM band (in addition to the 10 provided
for DAB). Presets are remembered even if the
unit is switched off.
MONO/STEREO(remote only)
This button enforces mono reception when
inadequate aerial signal strength results in
noisy stereo reception. MONO ‘forces’ mono
at all times until the button is pressed again for
AUTO. In AUTO mode, the tuner
automatically switches according to signal
strength.
INFO
Displays the current broadcast information in
the following order:
PI: Programme identification*
PTY: Programme type*
RT: Radio text*
CT: Clock date and time (as transmitted by
network)*
MS: Music/Speech (info only)*
DI: Decoder information*
Signal Strength with bargraph
Audio mode
AF:Alternate frequency*
- Returns to top of this list
* Relies on FM RDS. Not displayed if no or
insufficient RDS signal.
MENU (FM options)
Press MENU to access menu options whilst in
FM mode.
Use the TUNE up/down buttons to cycle
through the options, and the SELECT button
to choose displayed option.
Menu options available for FM are:
System reset: RESETS all presets and tuning
to 87.50MHz (beginning of FM Band)
Customer Version: Current software version