Mustek GSMART S50 - Manual (Page 11)

10
Playback mode
Use the Playback mode to review images you have captured and to review images in order to
delete them. Select Playback mode by sliding the mode switch on the right hand side of the
camera. The last picture taken is displayed first.
If the camera is empty, the display will say “No pictures on camera.” Either SD card or
internal memory will display. In order to review pictures in internal memory, the SD card
must be removed.
After a picture has been deleted, the camera will return to Playback mode.
Playback mode menu
Menu Selection Description
Delete Confirm delete of current image Select YES or NO
Delete All Confirm delete of all images Select YES or NO
Format Format the SD memory card/internal memory Select YES or NO
USB mode
Use the USB mode to download images to your computer and to recharge the camera’s
battery. The mode selection switch can be in either position (Capture or Playback).
Connect the mini USB plug to the mini USB socket on the camera and connect the larger size
USB plug to the USB socket on your computer. You will hear a low-high beep when
connecting and a high-low beep when disconnecting.
Note: All camera buttons are inactive during USB mode.
USB mode activity
Status Activity
Blinking green LED Charging
Green LED remains on Fully-charged
Red LED blinks 3 times Camera communicating with computer
Red LED remains on USB connected and transferring data
Fast blinking red LED When connecting camera to PC before driver
is installed. Please install driver.
Note:
• Red LED blinks continuously: Need to install driver to the computer.
• See Section 5 on how to download images to your computer.