Minolta DiMAGE Viewer - Manual (Page 48)

Place the mouse pointer over the tone curve. Click and drag
the curve.
Each time the tone curve is clicked, a new node will be
attached to the curve. The nodes can be moved by clicking
and dragging. The input and output levels of the node are dis-
played as it is moved. The input level (horizontal axis) refers
to the original image, and the output level (vertical axis) refers
to the correction applied to the image.
Any corrections made on the tone curve are immediately
applied to the displayed image. By placing the mouse pointer
on the displayed image, the grey or color level of that point
will be indicated on the tone curve by a white circle.
The reset button cancels all corrections in all channels.
48 ADVANCED IMAGE PROCESSING
Click the arrow next to the channel box to select the channel
from the drop-down menu. To make adjustments to the color
balance of the image, select the appropriate color channel. To
adjust the contrast or brightness of the image without affect-
ing the color, select the RGB channel.
The tone curves can be displayed with keyboard shortcuts.
While holding the control key (Windows) or command key
(Macintosh), press “1” to display the red channel, “2” to dis-
play the green channel, “3” to display the blue channel, or “0”
(zero) to display the RGB channel.
USING THE TONE CURVE