Magma PCI Expansion System PE6RR - Manual (Page 42)

M A G M A
34 Chapter 7 How to Get More Help
Returning Merchandise to MAGMA
If factory service is required, a Service Representative will give you a
Return Merchandise Authorization (RMA) number. Put this number and
your return address on the shipping label when you return the item(s)
for service. Magma will return any product that is not accompanied
by an RMA number. Please note that Magma WILL NOT accept COD
packages, so be sure to return the product freight and duties-paid.
Ship the well-packaged product to the address below:
MAGMA RETURNS DEPT.
RMA # ________
9918 Via Pasar
San Diego, CA 92126
USA
It is not required, though highly recommended, that you keep the
packaging from the original shipment of your Magma product. However,
if you return a product to Magma for warranty repair/ replacement or
take advantage of the 30-day money back guarantee, you will need to
package the product in a manner similar to the manner in which it was
received from our plant. Magma cannot be responsible for any physical
damage to the product or component pieces of the product (such as the
host or expansion interfaces for PCI expansion chassis) that are
damaged due to inadequate packing. Physical damage sustained in
such a situation will be repaired at the owner’s expense in accordance
with Out of Warranty Procedures. Please, protect your investment, a bit
more padding in a good box will go a long way to insuring the device is
returned to use in the same condition you shipped it in. Please call for
an RMA number first.