Miele B 890 - Manual (Page 28)

,
Repairs should only be carried out by an authorized technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage. The manufacturer cannot be held
responsible for unauthorized work.
The rotary iron does not turn.
Possible fault Fix
The rotary iron has no power. Plug the machine in and check if the circuit
breaker has tripped.
The laundry is not properly or poorly pulled in.
This tends to happen when ironing
delicate items with a new machine. Continue ironing, the issue is usually
resolved after 5-10 minutes of ironing.
New iron cover A new rotary iron cover should be washed at
140°F (60°C) for the laundry to be ideally
pulled in.
Lime or starch deposits on the
heater plate. Clean with household cleaners or
dishwasher detergent.
Creases/Folds occur
The heater plate is soiled (lime
deposits). Clean the heater plate with household
cleaners or dishwasher detergent.
The rotary iron cover is heavily soiled.
Deposits Wash the iron cover with houshold detergent
at 140°F (60°C) or replace with a new one.
See "Washing or replacing the ironing
cover".
The heater plate does not press on the roller.
The emergency release was
activated. Press the emergency release down
(see "Power failure").
Frequently asked questions
28