Memorex MPD8807CP User Manual
Page 14
13
CD OPERATION (CONTINUED)
While in the Stop mode, press the
PROG/EQ/ENTER button. The track
number will blink and “P-01” will appear
in the display.
1
TO PROGRAM THE MEMORY (UP TO 64 TRACKS)
Programming is the ability to preselect the order in which a series of tracks will be
played.
Select a track to be programmed using the
Skip
/
¥
❶
or
/
❷
button
. If
using a MP3 disc, see note below.
2
1
2
Press the
PROG/EQ/ENTER
button to
memorize the track. Repeat steps 2
and 3 to program additional tracks up
to a maximum of 64 tracks.
3
Press the PLAY/PAUSE (
)/
UP/Power On button
❶
to begin
programmed playback; “P” will appear
in the display. After the program is
played, it will stop or press the STOP
(■)/DOWN/Power Off button
❷
to stop
programmed playback.
Adjust the
Volume and EQ settings as desired (see
page 6).
1
2
4
NOTES:
• When in the Stop mode, press and hold the P.MODE/CLEAR button for two
seconds to clear the memory; “P” indicator will disappear.
• MP3: If an MP3 CD is inserted, you will first select the directory number in step
1, press the PROG/EQ/ENTER button, and then the file/track number.
SEE TOP OF NEXT PAGE FOR MORE NOTES ON PROGRAMMING
THE MEMORY.
MPD8807.O/M.QXD 5/19/03 7:54 AM Page 13