Mamiya 645 AFD - Manual (Page 3)

Condition #1
This display will appear before the shutter has been released (Normal
mode). At this point the Mamiya 645AFD will act as if there is a film
magazine attached and will display shutter speed and aperture respec-
tively. This indication will not appear under conditions 4b, 5 and 6.
Condition #2
This will appear under normal shooting conditions after the shutter has
been released (Capture mode). CaP db tells us the digital back is in the
process of capturing an image. It will be displayed until the digital
capture is complete except under conditions 4b, 5 and 6.
Condition #3
After the CaP db display these indicators may appear (After Capture
mode). Db-E indicates a digital back exposure warning. The +1.3
confirms the meter reading is +1.3 stops higher than the set exposure
on the camera. It will appear in the Manual and X exposure modes. If
the exposure setting set on the camera does not agree with the expo-
sure determined by the meter, this will be displayed showing the
difference between the two. When this appears, it will blink for three
seconds. It can be cancelled by pressing any button.
Internal LCD External LCD