Memorex MVDP1076 - Manual (Page 37)

36
CD OPERATION (CONTINUED)
During playback, press the Number buttons
corresponding to the track number to select your
desired track, and the unit will playback the desired
track automatically.
NOTE: To enter a track number larger than 9, press
the 10+ button, followed by the Number button (0-
9). If the track number is larger then 19, press the
10+ button to select the number for the first digit
followed by the Number button (0-9) for the second
digit.
1
SELECTING TRACKS USING THE
NUMBER BUTTONS
While in the Playback mode, press the
REPEAT button once; “REPEAT OFF” will
appear on the screen.
Press the REPEAT button a second time;
“REPEAT SINGLE” will appear on the
screen and the currently playing track will
repeat continuously.
Press the REPEAT button a third time;
“REPEAT ALL” will appear on the screen
and all tracks on the disc will repeat.
Press the REPEAT button once more to
cancel Repeat mode; “REPEAT OFF” will
appear temporarily on screen.
1
While in the Playback mode, press the
Repeat A-B button to define where you want
the section to start. Press the Repeat A-B
button again to define where you would like
the section to end, the unit will then play the
selected area continuously.
Press the Repeat A-B button again to cancel
Repeat A-B mode.
2
1
REPEAT PLAYBACK
While playing back a disc, this unit can
repeatedly playback one or all track(s) on a
disc.
A-B REPEAT PLAYBACK
While playing back a disc, this unit can
repeatedly play back a specific section.