Memorex MVD2256 - Manual (Page 23)

23
Picture controls are factory preset but you can adjust them individually as follows:
Picture control adjustment
Press UP or DOWN to select the
“PICTURE” option, then press
ENTER.
To display the picture adjustment
screen, press MENU.
RESET
Pressing RESET while making
picture adjustments will return all
adjustments to the factory preset
levels.
NOTE:
•
•
The On-screen display will disappear
6 seconds after finishing an adjust-
ment. The settings can only be
adjusted when they are displayed on
the TV screen.
The CONTRAST default setting is
set to maximum at the factory.
Press ENTER repeatedly to
select the item you want to
adjust.
1
2
3
4 Press UP or DOWN to adjust the
setting.
CONTRAST BRIGHTNESS TINT SHARPNESS
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
+
increase brightness
increase contrast
be brilliant color
be greenish color
decrease brightness
decrease contrast
be pale color
be reddish color
makes picture softer makes picture clearer
–
5 After your desired setting press
MENU until the MENU screen is
cleared.
COLOR